Contact NOW! for a Estimate

Enjoy Mr. Done Right's Blog with Helpful Information About Fixin' Stuff!

I will be posting tips and tricks of the trades bi-weekly. Let me know if there is something you would like to learn more about.

04January

Faucet Selections

Posted by : Elaine 1231
 

The dictionary defines a “faucet” as ‘A device for regulating the flow of a liquid from a reservoir such as a pipe or drum’. This is a bit older explanation not able to describe the utility of the modern faucets. The modern day faucets are something more than a regulator of the flow of water.

They provide a variety of functions in the kitchen or in the bath. The kitchen faucets comes with pullout and pull down sprays facilities for water filtering all in a variety of makes and styles where as the faucets in the bath are plenty available with fine matching accessories to suit the taste and likes of the consumer. However, it would be ideal to follow certain basic principles to make the best use of bath faucets.

Let us start with the bath. High spouts always facilitate easy washing of hands and filling water in cups or tumblers in the bath . The water purification system build in the faucets also makes available purified water for brushing of teeth and mouth washing protecting the teeth with the fluoride in tact. There are even faucets that provide cold drinking water without losing any of its natural minerals by passing the water softening system.

Leaky faucets are a perennial problem. The best way to prevent leaks is to provide a washer free or cartridge based faucet. The latter variety avoids the frequent need to change the misfit or worn out washers. These faucets provide a leak-less performance though out its life. This one-piece technology is conducive for a hassle free usage. The cartridge replacement is a one minute affair by taking out the old one and replacing it with the new one.

Like all plumbing products faucets also calls for quality material for durability and better service. It is always better not to be ‘penny wise pound foolish’. Instead of going for cheaper variety of brands, faucets made of good and durable metals like brass or copper makes the life easier in the long run. These faucets not only give you a superior performance but also present an elegant appearance in the bath. The faucets manufacturers offer a plethora of varieties for the modern bath or kitchen. It is your responsibility to choose the best suited for the kitchen or bath.

The industry having standardized the products, there cannot be any confusion with the selection of this accessory. However one needs to understand the basic details of your sink or bath. For example if one needs to select a faucet for the kitchen it would be appropriate to keep in mind the number of mounting holes under the sink. The exact number of the mounting holes may have to be found out if the same is concealed behind the existing faucets and deck.

The faucets for bath are available in two configurations such as the center set and the widespread set. The former is a 4-width type while the latter is of 8-width variety. Though the styles can be changed the size cannot be changed unless of course you want to replace the sink itself in the bath.

Before going to the plumbing accessory shop it is wise to ascertain the size and the type of the water supply lines that normally is either 3/8 inch or ½ inch. The supply hook ups comes in various materials like copper, braided copper and flexible plastic. Having confirmed the size of the of the supply line one has to shut off the water supply, remove the parts and take it into your favorite hardware or DIY store and select the faucets of your choice of the size and type best suited to your bath or kitchen.

The selection and fitting of a faucet may look simple however a wrong and thoughtless selection may prove futile and end up in a perennial problem and a sheer waste of your hard earned money.

Thank you for taking the time with me to learn more about what Mr. Done Right, the handyman / contractor does for you.

Sincerely,

Don Fenton

(AKA) Mr. Done Right

For more information on handyman or contractor work in the greater Austin area (or beyond), please contact your premiere handyman, Don Fenton, AKA Mr. Done Right Handyman Contractor of Austin, because Mr. Done Right ensures any repairs and/or remodels get Done Right the first time! Call us now for a free estimate! 512-659-8931

www.Handyman-Austin.com

Mr. Done Right on FacebookMr. Done Right on YelpMr. Done Right on Angie's ListMr. Done Right on Yellow Pages, YP.com

 * Click here to protect your privacy and the safety of your children on the Internet.

 

Please follow and like us:
RSS
Follow by Email
Facebook
Facebook
Pinterest
Pinterest

 

Leave a Comment

 

Helpful? Please spread the word :)